Wireless Access

Reply
New Contributor

can not use AP 303 as virtual controller

My customer have AP303 x 22 APs at office now. But i can not config it to be virtual controller 

It use unify ap on ap after connect to ap if select 

- virtual controller it have 2 option

1.load firmware from local file

2.load firmware from url

I can not find firmware 8.3.x.x for AP 303 coz firmware come with AP 303 is 8.3.0.0

 

Anyone can config AP303 please give me step to config it.

 

Many thanks and best regards,

Anucha Kositkulchon

 

 

New Contributor

Re: can not use AP 303 as virtual controller

The software needed for AP-303 (both AOS and Instant, 8.3.0.0) is still in beta stage, and has not been released.

You can download the beta image from the Aruba support portal, and upgrade the image on the AP (Instant) or controller (AOS).

The AP units themselves ship with a basic/incomplete version of the 8.3.0.0 code, which cannot be used to run the AP in operational mode.

New Contributor

Re: can not use AP 303 as virtual controller

I got 8.3.0.0 beta code from support. 8.3.0.0 not have on download site.

after upload to AP303 it can work as Virtual controller fine.

 

many thanks for support team.

New Contributor

Re: can not use AP 303 as virtual controller

Dear ALL,

 

have you solved the issue ? i have the similar scenario with AP-303 (RW) access points software version 8.3.0.0 not working   and converting to virtual controller or standalone access points ,

whrere the 8.3 release has been dragged from aruba support center .

 

plz advice , how can use it as standalone AP

 

 

New Contributor

Re: can not use AP 303 as virtual controller

Dear prince ,

 please if you can provide me with 8.3 beta version

 thank you .

 

 

                           

Aruba Employee

Re: can not use AP 303 as virtual controller


@rami.kanoun wrote:

have you solved the issue ? i have the similar scenario with AP-303 (RW) access points software version 8.3.0.0 not working   and converting to virtual controller or standalone access points ,

whrere the 8.3 release has been dragged from aruba support center .

 

plz advice , how can use it as standalone AP

 

 


The IAP 8.3.0.0 software for the IAP-303 is available here:

 

https://support.arubanetworks.com/DownloadSoftware/tabid/75/DMXModule/510/Command/Core_Download/Default.aspx?EntryId=29671

 

You may need a valid support contract in order to download from that link.

 

I'm not sure what you mean about the software being dragged from the support site. It's still there, for both IAP and controller based.


Charlie Clemmer
Aruba Customer Engineering
New Contributor

Re: can not use AP 303 as virtual controller

Worked fine the 8.3 beta version

 

thank you .

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: