06-25-2014 07:47 AM
I have a 7210 controller. I Use Clearpass to authenticate users. So I have a guest captive portal set up. It authenticates the user, and when initiating the login it will send the browser to (controller)/cgi-bin/login, the issue is that, this page is just looks completely different from our out pages, looks like just plain HTML with no styling. This wouldn't be an issue if the users didn't sit on the page for up to 10 seconds waiting to be redirected to our website.
How would I go about styling this page? I assume it is located on the controller, but I haven't been able to find much documentaiton about it's real location or how to customize it.
If no styling is possible, is there a way to shorten the amount of time a user spends on that page?
Solved! Go to Solution.
06-25-2014 07:53 AM
In the Captive Portal Authentication Profile, there is a parameter called "Redirect Pause" that you can lower to 2 seconds: http://www.arubanetworks.com/techdocs/ArubaOS_63_W
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
06-25-2014 07:54 AM - edited 06-25-2014 07:55 AM
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX
06-25-2014 08:05 AM
Oh wow. So. Get this. I had seen a previous post that I believe you made that suggested lowering it to 3 seconds. Which I did.. Or so I thought.
Well you know that whole "Save" button thing? Forgot to click that. You are right here as well. This did the trick. Now it's quick enough to redirect that it's a non-issue. Thanks!
06-25-2014 08:12 AM
On a side note to this topic, I know it's not the correct board for Clearpass, but do you happen to know where I can set the max users allowed to login with a specified username?
I use a ToS accept to login, which is tied to a username. I know I saw a topic somewhere about how to increase that number, but I can't think of the terms it's described in. I keep running across firewall sessions, which is not what I'm looking for.