Wireless Access

Reply
Occasional Contributor II
Posts: 27
Registered: ‎01-28-2015

can you help me on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI

can you help on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI,if possible with screenshots.Thanks in advance,.

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: can you help me on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI

Hi Karthik,

 

Which RAP model you are using ?

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: can you help me on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI

Hi,

The method is same for any AP. To insist you RAP to use only a-band we need to disable g-radio(in case if the RAP is dual band) as shown in the snapshot and select RF band as "a" in the AP system profile.

 

for your ref :

radio1.png

Radio2.png

 

Please feel free for any further help needed.

 

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Search Airheads
Showing results for 
Search instead for 
Did you mean: