Wireless Access

Reply
djv
Occasional Contributor I
Posts: 9
Registered: ‎07-13-2009

cannot get RF Protect licenses to work on a local controller

Hello everyone, this is my first post so here it goes.

Environment is one master and 38 locals.

We would like to start using Spectrum Monitoring.

Purchased 10 RF Protect licenses. Installed 2 of the licenses on a local controller.

Results after rebooting the controller was that the controller only saw the first 2 APs

I have setup an ap group for spectrum monitoring that is working on the master controller thanks to Marko, but can't get them to work on the local.

Thanks in advance

 

Aruba
Posts: 1,296
Registered: ‎08-29-2007

Re: cannot get RF Protect licenses to work on a local controller

The licences must all be equal. 

 

 

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
djv
Occasional Contributor I
Posts: 9
Registered: ‎07-13-2009

Re: cannot get RF Protect licenses to work on a local controller

RF licenses have to equal ap licenses?

Guru Elite
Posts: 8,732
Registered: ‎09-08-2010

Re: cannot get RF Protect licenses to work on a local controller

[ Edited ]

Yes. Licensing uses the lowest license count.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
djv
Occasional Contributor I
Posts: 9
Registered: ‎07-13-2009

Re: cannot get RF Protect licenses to work on a local controller

 

 

Thanks for your responses this has helped me figure out how to get spectrum monitoring up and running.

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: