Wireless Access

Reply
Occasional Contributor II

captive portal with wpa-psk

Hi all!

 

I would like to configure my ssid "guest" with wpa-psk encryption with passphrase, once the guest type the correct word the controller redirect to captive portal.

 

I'm trying to configure this, but the controller shows the following message:

Error processing command 'wlan ssid-profile "ssid-guest" opmode wpa2-psk-aes':Error: dot1x profile needs to be enabled in aaa profile "aaa_guest" to support opmode "wpa2-psk-aes" configured in ssid profile "ssid-guest"
anybody knows what commands i should type to enable dot1x profile in aaa profile "aaa_guest"?
maybe the questions is so easy but i'm not sure about the config, so i prefer to ask here before doing something wrong.
The config of "aaa_guest":

aaa profile "aaa_guest"
initial-role "role-guest-logon"
dot1x-default-role "role-guest-authen"

 

 

thanks in advance!

 

Highlighted
Guru Elite

Re: captive portal with wpa-psk


juancarlos.perezromero@telindus.es wrote:

Hi all!

 

I would like to configure my ssid "guest" with wpa-psk encryption with passphrase, once the guest type the correct word the controller redirect to captive portal.

 

I'm trying to configure this, but the controller shows the following message:

Error processing command 'wlan ssid-profile "ssid-guest" opmode wpa2-psk-aes':Error: dot1x profile needs to be enabled in aaa profile "aaa_guest" to support opmode "wpa2-psk-aes" configured in ssid profile "ssid-guest"
anybody knows what commands i should type to enable dot1x profile in aaa profile "aaa_guest"?
maybe the questions is so easy but i'm not sure about the config, so i prefer to ask here before doing something wrong.
The config of "aaa_guest":

aaa profile "aaa_guest"
initial-role "role-guest-logon"
dot1x-default-role "role-guest-authen"

 

 

thanks in advance!

 


try :

 

config t

aaa profile "aaa_guest"

authentication-dot1x defalt

 







********************************************

Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: captive portal with wpa-psk

thanks it works!

 

now clients has to enter the wpa2 key and after they will be redirected to captive portal.

 

 

thanks!

Guru Elite

Re: captive portal with wpa-psk

Glad that we can help!







********************************************

Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: captive portal with wpa-psk

i facing the same issue , but i want to know what the cause of this error ??

Guru Elite

Re: captive portal with wpa-psk

Use the WLAN/LAN Wizard to create the Captive Portal to Avoid that error.

 







********************************************

Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Guru Elite

Re: captive portal with wpa-psk

Wpa-psk requires a 802.1x profile in the AAA profile. You see that error when it is not configured. The wizard creates it automatically.






********************************************

Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: captive portal with wpa-psk

i tried to make it by the wizard many time , but nothing happen also the same error when i try to make a new AP group or new SSID

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: