06-05-2014 11:55 AM
Waiting for some 500 RAP-2 to upgrade.
Is there anyway to check the upgrade status somehow? Show ap database lists them all as down and been waiting some 45 mins.
I don't suspect an issue or anything (yet) since they are coming back 1 by 1 (very slowly) but being able to see which APs are actually upgrade somehow would be nice.
On a sidenote.. what happens when you failover from a backup-master back to the primary-master while RAPs are still busy upgrading? They should just reboot and start again right?
-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
06-05-2014 12:00 PM
You can check the controller with 'show ap image upgrade' to see if any of the APs are mis-matched and pulling new code...but if nothing is there, then need to look at whether the IPSec connections are working.
Sr. Techical Marketing Engineer
06-05-2014 12:42 PM
Do you mean show ap image version? The upgrade keyword doesn't isn't available.
Last time I checked, show ap database displayed when an AP was upgrading.
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.