Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

cli command for provision-ap

This thread has been viewed 13 times

  • 1.  cli command for provision-ap

    Posted May 14, 2014 03:09 PM

    Hi everyone,

     

    I know in aruba CLI there is command for provision-ap and re-group.  So my question is if I have ap name "ap-1" is already provisioned but I want to change its ap-group and at the same time makes it as "mesh portal" in mesh role. 

     

    can I do this?

     

    provision-ap

    ap-name ap-1

    ap-group apgroup-A

    mesh-role mesh-portal

    ap-name ap-2

    ap-group apgroup-A

    mesh-role mesh-portal

     

     

    Any suggestion is great appericate!

     

    Thanks,

     

     

    SL

     



  • 2.  RE: cli command for provision-ap
    Best Answer

    EMPLOYEE
    Posted May 14, 2014 03:38 PM

    Provision one firstly as normal via the gui, then in the cli do a "show audit" to see what the necessary commands are.