Wireless Access

Reply
Occasional Contributor II
Posts: 27
Registered: ‎12-11-2013

client session timeout

hi all,

 

is there any mechanism/setting to force the client disconnect after connected 30min from aruba controller side?

 

my controller model is 7210. OS is 6.3.1.2

 

thanks for your advices.

 

 

MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: client session timeout

The user idle timeout will clear the user from the user table if they are inactive for 3600 seconds by default.  This is configurable under Security > Authentication > Advanced.

 

6.3 User Guide explanation:

 

Maximum period after which a client is considered idle if there is no wireless traffic from the client.The timeout period is reset if there is wireless traffic. If there is no wireless traffic in the timeout period, the client is aged out. Once the timeout period has expired, the user is removed. If the keyword seconds is not specified, the value defaults to minutes at the command line.

 

Range: 1 to 255 minutes (30 to 15300seconds)
Default: 5 minutes (300 seconds)

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Occasional Contributor II
Posts: 27
Registered: ‎12-11-2013

Re: client session timeout

thx for reply.

but is there a way force the client disconnect/reconnect again even there is wireless traffic from the client ?
Guru Elite
Posts: 8,337
Registered: ‎09-08-2010

Re: client session timeout

What type of network is this?

Open, open w/ captive portal, 802.1X, PSK?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 27
Registered: ‎12-11-2013

Re: client session timeout

just open
Occasional Contributor II
Posts: 27
Registered: ‎12-11-2013

Re: client session timeout

no way force the client disconnect from aruba controller side, am i right ?
Guru Elite
Posts: 20,820
Registered: ‎03-29-2007

Re: client session timeout

aurbafresher what exactly do you want to do?  How do you want this to work?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 27
Registered: ‎12-11-2013

Re: client session timeout

i just wait to give 30mins free wifi usage to user...then force the user disconnect...
MVP
Posts: 1,412
Registered: ‎11-30-2011

Re: client session timeout

nope, don't think this possible without something like clearpass.

Search Airheads
Showing results for 
Search instead for 
Did you mean: