Wireless Access

Reply
Contributor II
Posts: 51
Registered: ‎11-02-2015

commands that require reboot

Are there any other commands other than changing the IP that requires the controller to be rebooted?

 

specifically, the firewall disable-stateful-sip-processing

-Joey
MVP
Posts: 4,308
Registered: ‎07-20-2011

Re: commands that require reboot

For that command to take effect you don't need to reboot the controller.

Allowing the controller to do DNS queries you will need to reboot the controller for that command to take effect
Ip name-server
Ip domain lookup
Ip domain name
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: