Wireless Access

Reply
Occasional Contributor II
Posts: 14
Registered: ‎04-04-2012

controller configs that dont mach

I have 2 720 controlers that were installed by a certified vendor 1 year ago, and when i look at the configs in a program like Beyond Compare they do not match.  it is not just ip info it is stuff like ip access list, ip session info ect  my question is should they not be the same and how do i make them the same.    

Guru Elite
Posts: 8,732
Registered: ‎09-08-2010

Re: controller configs that dont mach

Are they master-local or master-master?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 14
Registered: ‎04-04-2012

Re: controller configs that dont mach

Master local
Guru Elite
Posts: 8,732
Registered: ‎09-08-2010

Re: controller configs that dont mach

If you run show switches on the master, what do you see for the status of the local?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 14
Registered: ‎04-04-2012

Re: controller configs that dont mach

the controllers are master-local 

Occasional Contributor II
Posts: 14
Registered: ‎04-04-2012

Re: controller configs that dont mach

(psd-master01) #show switches

All Switches
------------
IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config ID
---------- ---- -------- ---- ----- ------- ------ ------------------- ---------------------- ---------
10.81.0.9 psd-master01 Gig Harbor, WA master Aruba7220 6.4.2.3_47524 up UPDATE SUCCESSFUL 0 67
10.81.0.14 psd-local01 Gig Harbor, WA local Aruba7220 6.4.2.3_47524 down UPDATE REQUIRED 0 0

Occasional Contributor II
Posts: 14
Registered: ‎04-04-2012

Re: controller configs that dont mach

(psd-master01) #show switches

All Switches
------------
IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config ID
---------- ---- -------- ---- ----- ------- ------ ------------------- ---------------------- ---------
10.81.0.9 psd-master01 Gig Harbor, WA master Aruba7220 6.4.2.3_47524 up UPDATE SUCCESSFUL 0 67
10.81.0.14 psd-local01 Gig Harbor, WA local Aruba7220 6.4.2.3_47524 down UPDATE REQUIRED 0 0

 

ignore the down state the second controler is disconected from the network for now.  i will have it back online mometarily. 

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: controller configs that dont mach

your local needs an update.
Try doing a 'write memory' on the master and run 'show switches' again to see if the update is successful. The write memory will push down configuration from the master to the local

Make sure your Master configuration is correct though before doing the write memory
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Guru Elite
Posts: 8,732
Registered: ‎09-08-2010

Re: controller configs that dont mach

Once it comes back online, run the command again and see if the update is
successful.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 14
Registered: ‎04-04-2012

Re: controller configs that dont mach

All Switches
------------
IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config ID
---------- ---- -------- ---- ----- ------- ------ ------------------- ---------------------- ---------
10.81.0.9 psd-master01 Gig Harbor, WA master Aruba7220 6.4.2.3_47524 up UPDATE SUCCESSFUL 0 67
10.81.0.14 psd-local01 Gig Harbor, WA local Aruba7220 6.4.2.3_47524 up UPDATE SUCCESSFUL 9 67

 

controllers up now reran command 

Search Airheads
Showing results for 
Search instead for 
Did you mean: