Wireless Access

Dear all, this is my first post at the Airheads and I hope this is the right place to be!!

I need to implement a wifi enterprise solution based on Aruba 105 Access Points.

I've already mounted the Airwave management system, but before the hype of starting installing the ap's I prefer to clarify some basics... I'm mainly concerned about security because the pilot zone where I need to start is just a 30 meters from the parking lot and I need to avoid the wireless signal to available there!!

Where do I start? What kind of info should I be aware of?

Tks in advance

The solution would be strong encryption like WPA2 Enterprise.

Please see "Building Global Security Policy for Wireless LANS" here:  http://www.arubanetworks.com/pdf/technology/whitepapers/wp_Global_security.pdf to start..

Also, look over the wealth of information in our Validated Reference Design Guides, loads of good information contained within those.

http://www.arubanetworks.com/technology/reference-design-guides/

thanks a lot for the hel, the document is a really good start for writing down some procedures!