Wireless Access

Reply

different AAA profile applied to different tunnels

Hi,

 

I am tunnelling traffic from local controllers over GRE to a DMZ controller and would like to be able to apply different a different aa profile to each tunnel and essentially have different captive portals.

 

Easy enough to make the tunnel untrusted and apply a global profile with,

 

aaa authentication wired profile <name>

 

Any ideas, how or where I can apply different profiles?

 

Thanks


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Aruba Employee

Re: different AAA profile applied to different tunnels

If you can bring each GRE tunnel in to separate VLAN's then you can use the following command which was added to AOS 6.0;

(Aruba650) (config) # vlan 2 wired aaa-profile ?
<profile-name>          Profile name

 

From here you can have separate roles and hence different captive portal's

 

Re: different AAA profile applied to different tunnels

Thanks Giles.  Exactly what I was after.

 

:-)


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: