Wireless Access

Reply
New Contributor

finding new controller

Hello Gents,

 

I just came back from an event with many APs and 2 Controllers clustered. Now, I need some of the APs for a another event with different controllers. Problem is, the APs have the IP from the old controllers and therefor, can't connect to the new ones.

Is there a autoreset if they cant reach their previous controller or can i hard reset them somehow? Cant find a reset button on the AP275.

 

Just to make sure: i can ping the AP from my controller, even though they are in seperatenetworks.

 

Thanks your your help,

Raffa

Highlighted

Re: finding new controller

The below document shows you where the reset button is located and how to reset the AP.

 

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=29188

 

You should use a controller discovery mechanism in order for the AP to locate the controller.

 

https://www.arubanetworks.com/techdocs/ArubaOS_64_Web_Help/Content/ArubaFrameStyles/AP_Config/AP_discovery_ADP.htm


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: