Wireless Access

Reply
MVP
Posts: 501
Registered: ‎04-03-2007

firewall-cp usage

Is anyone currently using the firewall-cp functionality on the controller? We have been using a session acl applied to the physical interfaces on our controllers, but I'd like to migrate to using the service ACLs via firewall-cp. It would be great to get some real-world experience from others in the community on this.

 

Much appreciated!

==========
Ryan Holland, ACDX #1 ACMX #1
The Ohio State University
Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: firewall-cp usage

I've used it in some deployments. No issues; just be sure to test.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP
Posts: 501
Registered: ‎04-03-2007

Re: firewall-cp usage

Aside from the fact that logging of hits is not currently supported (please vote for this feature), I'm noticing that the actual custom rules are not showing in the running-config. Any ideas where one can find the rules that have been applied to the controller (outside of "show firewall-cp")? Why isn't this showing in the config?

==========
Ryan Holland, ACDX #1 ACMX #1
The Ohio State University
Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: firewall-cp usage

I believe anything outside the defaults will show up in the running config. 


Thanks, 
Tim

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP
Posts: 501
Registered: ‎04-03-2007

Re: firewall-cp usage

Negative, they do not (at least not in 6.3.1.12)...
==========
Ryan Holland, ACDX #1 ACMX #1
The Ohio State University
Search Airheads
Showing results for 
Search instead for 
Did you mean: