Wireless Access

Reply
New Contributor
Posts: 4
Registered: ‎09-17-2016

high interference and low speed

I am newbie to wireless and I need assistance with 2 access points that have high interference, high channel utilization, and low speed. I have disabled 3 out of 6 SSIDs that are not needed from them, and from the neighboring access points. What else can I do? Please see attachment. 

MVP
Posts: 951
Registered: ‎04-13-2009

Re: high interference and low speed

Hi,

 

I'd recommend looking into reducing your Min-tx-power and the max-tx-power as your cafe AP can "see" at least 15 other APs on the same channel. Also it can see 5 APs with a SNR of over 25 which isn't good.

 

Some reading about power levels.

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
Showing results for 
Search instead for 
Did you mean: