Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

how to add the following MAC addresses to provide Ethernet access on my Aruba RAP

This thread has been viewed 0 times

  • 1.  how to add the following MAC addresses to provide Ethernet access on my Aruba RAP

    Posted May 05, 2015 05:46 PM

    how to add the MAC addresses of laptop to provide ethernet access on my Aruba RAP to enable me to add these systems to the company domain.

    i have 5 port rap .

    port 0=ISP.

    port 1= laptop

    port 2 =IP PHONE.

    port 3& 4 = here also i need to connect the laptop.how to do this.



  • 2.  RE: how to add the following MAC addresses to provide Ethernet access on my Aruba RAP

    EMPLOYEE
    Posted May 05, 2015 05:48 PM
    Are your ports trusted or untrusted?
    Are you doing MAC-authentication or 802.1X ?
    What RADIUS server are you using?

    Thanks,
    Tim


  • 3.  RE: how to add the following MAC addresses to provide Ethernet access on my Aruba RAP

    Posted May 06, 2015 05:01 AM

    HI

     

    You don't need to configure anything if you make you switch ports (Eth 1-5) as trusted. if the are trusted we need to map a AAA profile with required configuration.

     

    Please feel free for any further help on this.

     

    For your ref :

    Wired1.png



  • 4.  RE: how to add the following MAC addresses to provide Ethernet access on my Aruba RAP

    Posted May 06, 2015 05:03 AM

    Hi,

     

    Sorry there is a typo :)

     

    "if they are untrusted, we need to map a AAA profile with required configuration."