Wireless Access

Reply
rzz
Contributor II

how to configure DHCP on controller

Hi


May i check how does DHCP work on the controller as apparantly am getting the feedback that the DHCP address am trying to set is the same as VLAN 1.

Guru Elite

Re: how to configure DHCP on controller

What is the exact error?  If you have DHCP configured it must be in the subnet of a VLAN configured on the controller to work.  If it overlaps, you might get an error.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

rzz
Contributor II

Re: how to configure DHCP on controller

 

70051.jpgip address of the standalone controller is 192.168.50.18/23

 

 

Guru Elite

Re: how to configure DHCP on controller

I would just give the controller a dummy ip address at the startup wizard, and don't configure anything major.  There could be some bugs with the startup wizard.

 

When you reboot and have the full configuration GUI, you should be able to configure everything more easily.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: