Wireless Access

Reply
Highlighted
Occasional Contributor I

how to configure mesh in iap 207

how to configure mesh in iap 207 

MVP

Re: how to configure mesh in iap 207

http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-Configure-a-basic-Instant-mesh/ta-p/205027

 

HOW TO DEPLOY IAP MESH IN 4.1

Use following steps to deploy mesh network in IAP4.1:

  1. Put all IAPs in a wired switch, make sure VC key and configuration has been properly synchronized, and make sure country code has being configured; # Configure a new SSID and delete factory default SSID
  2. Turn off ‘extended-ssid’ and reboot the IAP cluster;
  3. Move one of the IAP to the remote site, without wired uplink it will become mesh point.
Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Occasional Contributor I

Re: how to configure mesh in iap 207

How to turn off Turn off ‘extended-ssid’ 

MVP

Re: how to configure mesh in iap 207

You can change this under System - General. Remember to click the show advanced setting link at the bottom.

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: