Wireless Access

Reply

i have a question may some one help me on this attached document.

 
Guru Elite

Re: i have a question may some one help me on this attached document.

This is not possible with a single RAP.


Thanks,
Tim

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480

Re: i have a question may some one help me on this attached document.

is any other way of connecting provide your alternate idea please.

Re: i have a question may some one help me on this attached document.

Here's an alternaive that would work but might not be the most appropriate.

 

Remote mesh.

 

  1. Setup your RAP as a remote mesh portal. 
  2. Configure another RAP as a mesh point and place near Cisco IP Phone
  3. Configure wired port on the mesh point to be on Cisco IP Phone VLAN
  4. Connect IP Phone to mesh point wired port.
Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: