Hi Matthew,
We are on AMP 7.7.13 and iAP 6.4.2.0.
When looking at the config, it shows the 2 bandwidth lines as such
Desired bandwidth-limit 2048
bandwidth-limit 768
Looking at the VC and the line shows
Configuration: Error (Configuration contains invalid commands)
running a repair doesnt seem to resolve the issue. I am 99.999% sure its not anything else in the config as if i remove the logic and revert back to
%if custom_variable_1%
bandwidth-limit %custom_variable_1%
%endif%
The error doesnt appear, making me think that the rest of the config is OK, and its this bit causing the issue.
TIA
G