a week ago
(Sorry for my bad english.)
I have the following problem or wanted to ask whether that is at all.
I would like to build an iAP (as VC) with a guest WLAN. The IP address is to be managed by iAP (Virtual Controller managed).
This WLAN should however be connected via NAT not in the default VLAN of the AP (default) but in the VLAN 18. The VLAN 18 is located on the iAP per tag.
Is that possible?
If i build it so the Traffice is not connected in VLAN 18 but in VLAN 1.
The VLAN ID in the DHCP scope does not help.
Which function has the VLAN ID in the local DHCP scope
If i config this way: IP address per network assigned and client vlan assignment per default, it works
thank for help and have a nice day