Wireless Access

Reply

iap-135 eth1 connected to a printer

quick question

iap-135 powered by a poe injector (not poe+).
eth0 connected to a DSL modem
eth1 connected to a printer

no link light on the printer or a laptop.

please tell me poe+ is not required for the 2nd port to work?

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]

Re: iap-135 eth1 connected to a printer

Yes it is or power adapter
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: iap-135 eth1 connected to a printer

actually quite interesting found this article
http://community.arubanetworks.com/t5/Controller-less-WLANs/Why-does-the-ethernet-1-port-of-IAP-134-135-do-not-turn-active/ta-p/175344

but when you upgrade to 4.1.1.0 the port works without POE+. Just tested it

interesting...
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]

Re: iap-135 eth1 connected to a printer

Nice!!, good to know

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: iap-135 eth1 connected to a printer

crazy.
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: