Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎09-07-2016

is there a limited devices for a Group

Hi,

 

I have a Airwave with more than 1600 devices, and I have a group with more than 1400 devices. It's a problem??

 

I'm asking this because there are a lot of bad behavior from de AirWave like:

- after updating a template it takes more than 2  to 4 hours to show "Good" on status colum

- after adding a new device it takes more than 2 to 4 Hours to show "Good" on status colum

- there also devices that are in permanently verifying status

 

strange behaviors that I didn’t have at the beginning

 

We went to the version 8.0.11.2 and the AppRF stop Working.

 

There are just to many issues and the Airwave is not doing is thing, like being a monitor tool for the IAP's

 

 

Guru Elite
Posts: 21,260
Registered: ‎03-29-2007

Re: is there a limited devices for a Group

You could have other things going on, so you should open a case with TAC.  Your problems might not be caused by having 1600 devices, but they could be a symptom of something else.  They can take a look at everything including network bandwidth, configuration and possible horsepower of your box to determine what could be the cause of your issues.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: