Wireless Access

Reply
Frequent Contributor I
Posts: 68
Registered: ‎01-03-2014

is there a way to get a report on airwave that shows AP ethe interface status and errors

 I would like to get a report on airwave that shows the status and stats for the ethernet interfaces on the AP (from the AP's standpoint).   We have had some switch ports that are hard coded (100/full ) and since the AP's are auto they will end up half duplex and cause issues.  anyone know of a report on airwave that I can run to get this info?  or a quick look on the controller that will show this on all AP's?

MVP
Posts: 952
Registered: ‎04-13-2009

Re: is there a way to get a report on airwave that shows AP ethe interface status and errors

The following report will show you what you're after I believe.

 

device.jpg

 

Shows this:

 

device1.jpg

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Frequent Contributor I
Posts: 68
Registered: ‎01-03-2014

Re: is there a way to get a report on airwave that shows AP ethe interface status and errors

that gets me what I need Thank You.

Search Airheads
Showing results for 
Search instead for 
Did you mean: