Wireless Access

Reply
Frequent Contributor II

l2 vlan

In  L2  deployment while creating Vlans on controller do we need to put IP addresses for the Vlans?

Aruba Employee

Re: l2 vlan

No, you do not need an IP.  However, if you wan to do Captive Portal, you will need an IP on the controller for the user VLAN.

 

-Mike

Frequent Contributor II

Re: l2 vlan

Intervlan routing should be disabled in this case ?

 

Aruba Employee

Re: l2 vlan

I do not believe this matters since the controller will not have an IP in that VLAN.  For the L2 VLANs, L3 routing will be done on the upstream device not the controller.

 

-Mike

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: