Wireless Access

Reply
New Contributor

lic-sec-2 no AP license?

Issue w/AP not joining...  Am I missing a license?  I only got two certificates to redeem but AP indicates unlicensed?

 

(r8-aruba7005-1) #show license-usage ap

 

AP Licenses

-----------

Type                     Number

----                     ------

AP Licenses               0

RF Protect Licenses       2

PEF Licenses             2

Overall AP License Limit 0

 

AP Usage

--------

Type             Count

----             -----

Active CAPs     0

Standby CAPs     0

RAPs             0

Remote-node APs 0

Tunneled nodes   0

Total APs       0

 

Remaining AP Capacity

---------------------

Type Number

---- ------

CAPs 0

RAPs 0

 

(r8-aruba7005-1) #show license

 

License Table

-------------

Key                                               Installed   Expires Flags Service Type

---                                               ---------   ------- ----- ------------

6IVM9ZDJ-54C/VhnH-QCrwNY43-M20+LXpV-ZPKQ5gVl-WTE 2015-10-12 Never     E     Next Generation Policy Enforcement Firewall Module: 2

                                                  10:50:18

Men8iiEe-/MhWqM7+-OyBukkep-OmFmsWJx-t5U39FQk-WWg 2015-10-12 Never     E     RF Protect: 2

                                                 10:50:37

 

License Entries: 2

 

Flags: A - auto-generated; E - enabled; R - reboot required to activate

 

 

 

(r8-aruba7005-1) #show keys

 

Licensed Features

-----------------

Feature                                             Status

-------                                             ------

Access Points                                       0

RF Protect                                         2

VPN Server Module                                   4096

xSec Module                                         0

Next Generation Policy Enforcement Firewall Module 2

Advanced Cryptography                               0

RF Protect                                         ENABLED

Policy Enforcement Firewall                         ENABLED

VPN Server                                         ENABLED

xSec Module                                         DISABLED

Policy Enforcement Firewall for VPN users           DISABLED

Advanced Cryptography                               DISABLED

Maritime Regulatory Domain                         DISABLED

 

(r8-aruba7005-1) #show ap database

 

AP Database

-----------

Name               Group   AP Type IP Address   Status     Flags Switch IP     Standby IP

----               -----   ------- ----------   ------     ----- ---------     ----------

9c:1c:12:ce:72:ca bxb-300 103     192.168.80.2 Up 8m:51s IL     192.168.88.2 0.0.0.0

 

Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed

       I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch

       X = Maintenance Mode; P = PPPoE AP; B = Built-in AP

       R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;

       c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2

       u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP

       M = Mesh node; Y = Mesh Recovery

 

Total APs:1

 

(r8-aruba7005-1) #show log system 10 | include stm

Oct 14 06:58:48 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed

Oct 14 06:58:48 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88

Oct 14 06:58:48 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed

Oct 14 06:58:48 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88

Oct 14 06:58:48 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed

Oct 14 06:58:49 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88

Oct 14 06:58:49 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed

Oct 14 06:58:49 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88

Oct 14 06:58:49 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed

Oct 14 06:59:26 :305038: <WARN> |stm| No available license for AP 9c:1c:12:ce:72:ca

 

(r8-aruba7005-1) #show ap database long

 

AP Database

-----------

Name               Group   AP Type IP Address   Status Flags Switch IP     Standby IP Wired MAC Address Serial #   Port FQLN Outer IP User

----               -----   ------- ----------   ------ ----- ---------     ---------- ----------------- --------   ---- ---- -------- ----

9c:1c:12:ce:72:ca bxb-300 103     192.168.80.2 Down           192.168.88.2 0.0.0.0     9c:1c:12:ce:72:ca CU0081678       N/A   N/A

 

Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed

       I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch

       X = Maintenance Mode; P = PPPoE AP; B = Built-in AP

       R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;

       c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2

       u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP

       M = Mesh node; Y = Mesh Recovery

 

Port information is available only on 6xx.

 

Total APs:1

Guru Elite

Re: lic-sec-2 no AP license?

The security license includes PEFNG and RFP, not AP. You'll need to add AP licenses. 

You should also consider using enterprise licenses in the future which include all 3 plus AirWave. 


Thanks, 
Tim

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor

Re: lic-sec-2 no AP license?

Does the AP license need to match the others two (2)?

 

Thanks

Guru Elite

Re: lic-sec-2 no AP license?

Yes. Licensing is least common denominator. If you have 6 RFP, 6 PEFNG and 1
AP license installed, only 1 AP will come up.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: