Wireless Access

Reply
Occasional Contributor II
Posts: 14
Registered: ‎04-04-2012

licence dont match on controlers

i have 2 720 controlers and  i have ap that will not boot that report no licence but i have plenty when i look the licence dont match on the controlers  one has 450 ther other has 45 ap licences   is this a issue and if so how do i fix it 

MVP
Posts: 1,410
Registered: ‎11-07-2008

Re: licence dont match on controlers

Would need more information, specifically:

 

The serial console output/display console output where you are seeing the message 'no license'

The serial console output of the AP booting up

Is this CAP, RAP, etc? 

Centralized licensing? Are you using AP only, or AP/PEF/WIP/etc?

Jerrod Howard
Sr. Techical Marketing Engineer
MVP
Posts: 288
Registered: ‎08-27-2012

Re: licence dont match on controlers

Do a screenshot of your licensing on the controller the AP is terminating to (or the controller handling licensing if its centralized). Ensure that AP, PEFNG, and RFProtect license counts match. If for example you have 4 AP, 2 PEF, and 2 RFP, then you're limited to 2 APs until you purchase more PEF and RFP.
ACDX #419 | ACMP |
Search Airheads
Showing results for 
Search instead for 
Did you mean: