Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎05-02-2016

local-userdb add username <MAC> password <MAC> role <role> - Command not working?

Is the hyphen in the MAC delimiting the cmd? (User/pass have to match device MAC format) Airheads has plenty of advice for adding guest users, but I couldn’t find anything for specifying role, and the support page for the local-userdb add doesn’t give a syntax example with role either.  

 

local-userdb-add username XX-XX-XX-XX-XX-XX password XX-XX-XX-XX-XX-XX role VOIP-PHONE

 

What bit of syntax am I missing? 

MVP
Posts: 4,232
Registered: ‎07-20-2011

Re: local-userdb add username <MAC> password <MAC> role <role> - Command not worki

>From the user guide:
You must enter the MAC address using the delimiter format configured in the MAC authentication profile. The default delimiter is none, which means that MAC addresses should be in the format xxxxxxxxxxxx. If you specify colons for the delimiter, you can enter MAC addresses in the format xx:xx:xx:xx:xx:xx.
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor
Posts: 2
Registered: ‎05-02-2016

Re: local-userdb add username <MAC> password <MAC> role <role> - Command not worki

Yep, that's it. Thanks much.



The information contained in this transmission is confidential, proprietary and protected pursuant to Federal regulations; it is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any distribution, copying, disclosure, use of, or reliance on, the contents of this transmission is strictly prohibited. If you have received this communication in error, please notify the sender immediately and permanently delete the original message, attachments and all copies.
Search Airheads
Showing results for 
Search instead for 
Did you mean: