Wireless Access

Reply
4me
Contributor I
Posts: 48
Registered: ‎01-23-2015

logging configuration

Hi,

 

How log all the users /cilent session  inculding authentication logs by using logging. we have splunk sever,  I have configured  logging to user --> level7 ----> notifications but no logs found on logging server 

Guru Elite
Posts: 21,480
Registered: ‎03-29-2007

Re: logging configuration

Try the link here to see if these are the events you want:

config t
logging level informational security process authmgr

 

 http://community.arubanetworks.com/t5/Command-of-the-Day/COTD-logging-authentication-events/m-p/5328/highlight/true#M220

 

Then try this:

 

logging <ip address of server> severity informational type security

 

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

4me
Contributor I
Posts: 48
Registered: ‎01-23-2015

Re: logging configuration

Hi Colin,

 

I have created policies to forward  web traffic to my splunk severs and applied those policies to user role called "guest", but i never see any traffice here, could you please correct wrt configuration

 Capture.PNG

 

the below one is for logging 

Capture.PNG

 

Guru Elite
Posts: 21,480
Registered: ‎03-29-2007

Re: logging configuration

You should just be able to type:

 

config t
logging <ip address of syslog server>

Please see the article below: 

 

http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-to-configure-syslog-setting-on-Aruba-Controllers/ta-p/185690

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

4me
Contributor I
Posts: 48
Registered: ‎01-23-2015

Re: logging configuration

Its not working for me, please suggest any other option 

Guru Elite
Posts: 21,480
Registered: ‎03-29-2007

Re: logging configuration

Are you seeing ANY traffic going to the syslog server?

 

Please open a case with TAC so they can look at your configuration.  



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: