Wireless Access

Reply
Contributor I
Posts: 24
Registered: ‎08-03-2016

message to client

Hi every one.
a client asks me the following question

"Is it posible to send some message to user when is connected?"

Is it posible with Aruba plataform?

may be with clearpass

Thank very much

 

 

Guru Elite
Posts: 8,638
Registered: ‎09-08-2010

Re: message to client

[ Edited ]

The only way to do this would be using the OnGuard persistent agent in
ClearPass.

 

-EDIT- I may have misread. Are you trying to send a message to the wireless user or to an external user?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Guru Elite
Posts: 21,274
Registered: ‎03-29-2007

Re: message to client

This can be done via mac address with Airwave using "Connected Clients" trigger:  http://www.arubanetworks.com/techdocs/AirWave_8_0_Web_Help/UserGuide.htm#AWUserGuide/Chapter7_DailyTasks/triggers_clients.htm?Highlight=connected



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 24
Registered: ‎08-03-2016

Re: message to client

Thank for your response, How does work  OnGuard persistent agent?

Contributor I
Posts: 24
Registered: ‎08-03-2016

Re: message to client


But, can you make a custom message for the client that appear when is connected?

Guru Elite
Posts: 8,638
Registered: ‎09-08-2010

Re: message to client

Please be more specific.



You want a message to appear on a client/device after connecting to the
network?

-or-

Do you want a message to be sent to an email address when a specific
client/device connects?

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor I
Posts: 24
Registered: ‎08-03-2016

Re: message to client

The first

 

"You want a message to appear on a client/device after connecting to the
network?"

 

The client asks me if is there a way to send a message to cliente/device when is connected.

Guru Elite
Posts: 8,638
Registered: ‎09-08-2010

Re: message to client

OnGuard would be able to do it but it would be incredibly overkill and
requires installing an agent on the client.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor I
Posts: 24
Registered: ‎08-03-2016

Re: message to client


yes, would be incredibly overkill, but is the client query.
Wiht OnGuard, could I make a custom messages?
for example that appear on client/device after association, while the user is working.
maybe a ad

Search Airheads
Showing results for 
Search instead for 
Did you mean: