Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

need clarification on Aruba AP-205H regarding multiple eth ports in device

This thread has been viewed 0 times

  • 1.  need clarification on Aruba AP-205H regarding multiple eth ports in device

    Posted Jun 07, 2016 08:32 AM

    Hi,

     

    We have a customer requirement like RAP deployment, there will be a central location controller will be located and 50 branch office with 5 users every location where 1 AP is suffitient, the clarification required is all the location we will place an AP-205H as RAP and communicate to controller via public IP in AP-205H there are 4 eth ports one of the port will go to the uplink to the AP and remaining ports can we use it to connect any of our laptop, desktop and printer or any other network devices and get the network connectivity established to central controller is it possible to configure such policy in the central controller.

     

    Thanks and regards,

    Nagaraj



  • 2.  RE: need clarification on Aruba AP-205H regarding multiple eth ports in device
    Best Answer

    EMPLOYEE
    Posted Jun 07, 2016 08:53 AM
    Yes. If you have the access point configured as a remote ap you can just make sure the forwarding ode of the wired ports is tunneled. You can also set what vlan you want them to be on..


  • 3.  RE: need clarification on Aruba AP-205H regarding multiple eth ports in device

    EMPLOYEE
    Posted Jun 07, 2016 08:54 AM
    Yes, the ports can be tunneled or bridged.