Wireless Access

Reply
Occasional Contributor II
Posts: 12
Registered: ‎07-20-2015

need clarification on Aruba AP-205H regarding multiple eth ports in device

[ Edited ]

Hi,

 

We have a customer requirement like RAP deployment, there will be a central location controller will be located and 50 branch office with 5 users every location where 1 AP is suffitient, the clarification required is all the location we will place an AP-205H as RAP and communicate to controller via public IP in AP-205H there are 4 eth ports one of the port will go to the uplink to the AP and remaining ports can we use it to connect any of our laptop, desktop and printer or any other network devices and get the network connectivity established to central controller is it possible to configure such policy in the central controller.

 

Thanks and regards,

Nagaraj

Guru Elite
Posts: 21,269
Registered: ‎03-29-2007

Re: need clarification on Aruba AP-205H regarding multiple eth ports in device

Yes. If you have the access point configured as a remote ap you can just make sure the forwarding ode of the wired ports is tunneled. You can also set what vlan you want them to be on..


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: need clarification on Aruba AP-205H regarding multiple eth ports in device

Yes, the ports can be tunneled or bridged.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: