Wireless Access

Reply
Occasional Contributor II
Posts: 55
Registered: ‎10-18-2012

non wifi interference

Hi,

 

How can I mitigate non wifi interference or configure non wifi immunity.

 

Thanks

 

Guru Elite
Posts: 21,588
Registered: ‎03-29-2007

Re: non wifi interference

Interference immunity is located in the ARM profile, but it should only be changed with the help of support, because it decreases coverage.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 55
Registered: ‎10-18-2012

Re: non wifi interference

Thanks, could you let me know where in ARM profile, I couldnt see ARM in GUI.

Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: non wifi interference

ARM profiles are located under All Profiles --> RF Management --> Adaptive Radio Management (ARM) Profile; they are then applied to the appropriate AP Group.    However, the Non-wifi Inteference Immunity settings are found in the 802.11g and 802.11a radio profiles respectively.    But as Colin mentioned, these settings should be changed with care (and usually with the backing of Aruba support). 

 

The following may also provide good references:

 

http://community.arubanetworks.com/aruba/board/message?board.id=campus-wlan-and-high-density-wi-fi&message.id=459#M459

 

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Search Airheads
Showing results for 
Search instead for 
Did you mean: