Wireless Access

Hello everyone,

I'm new on the forum and i don't have lot of skill on aruba network, but you can help me to grow :)
I have a question, but before a little point on my configuration.

Currently I have two aruba controllers 3600 with a park of 130 AP, I have a mix of AP60 and AP93 in bridge mode with several SSID.

My question, it's possible to plug an AP60 (in bridge mode) on a tag port in order to have two vlan on two SSID? How I can configure my AP?

Thanks for your answer,
Regards

You can indeed do that.

Assuming your VAPs are configured in bridge mode, with suitable VLANs assigned, then...

To get you started, login to your controller and have a look at the "wired ap profiles" under the "AP" subtree. That will give you an idea of what settings you can apply.

Create a wired ap profile, apply it to your ap/group and test!

That assumes of course, that you've already setup your switch ports (that attach to the APs) in the way you need!

Hello,

Thank for your reply, I try it next week and I will do a feedback,

Regards

Thank for the reply, it's solved,

Regards