Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎11-22-2012

port tag supported on AP60-93 ?

Hello everyone,

I'm new on the forum and i don't have lot of skill on aruba network, but you can help me to grow :)
I have a question, but before a little point on my configuration.

Currently I have two aruba controllers 3600 with a park of 130 AP, I have a mix of AP60 and AP93 in bridge mode with several SSID.

My question, it's possible to plug an AP60 (in bridge mode) on a tag port in order to have two vlan on two SSID? How I can configure my AP?

Thanks for your answer,
Regards

 

 

MVP
Posts: 562
Registered: ‎11-28-2011

Re: port tag supported on AP60-93 ?

You can indeed do that.

 

Assuming your VAPs are configured in bridge mode, with suitable VLANs assigned, then...

 

To get you started, login to your controller and have a look at the "wired ap profiles" under the "AP" subtree. That will give you an idea of what settings you can apply.

 

Create a wired ap profile, apply it to your ap/group and test!

 

Kudos appreciated, but I'm not hunting! (ACMX 104)
MVP
Posts: 562
Registered: ‎11-28-2011

Re: port tag supported on AP60-93 ?

That assumes of course, that you've already setup your switch ports (that attach to the APs) in the way you need!

Kudos appreciated, but I'm not hunting! (ACMX 104)
New Contributor
Posts: 3
Registered: ‎11-22-2012

Re: port tag supported on AP60-93 ?

Hello,

Thank for your reply, I try it next week and I will do a feedback,

Regards

New Contributor
Posts: 3
Registered: ‎11-22-2012

Re: port tag supported on AP60-93 ?

Thank for the reply, it's solved,

Regards

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: