Wireless Access

Reply
Occasional Contributor I

ports on IAP

Hello,

 

Can someone please help me understand what is the use/difference between enet0 & enet1 ports in IAP-325. what happens if enet1 is connected to network switch instead of enet0 & is there a way to find out from the iap itself.

Thank you.

 

Guru Elite

Re: ports on IAP

You would always want ethernet0 plugged into the LAN for normal operation.   If you look through the ap tech-support and search for "ethernet" you would be able to find out which port is plugged in.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: