Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

proper AP-ANT-13B orientation and spacing

This thread has been viewed 0 times

  • 1.  proper AP-ANT-13B orientation and spacing

    Posted Apr 04, 2016 04:13 PM

    Hi,

    To achieve full benefits of MIMO, with 2x2 AP and AP-ANT-13B antennas mounted on a ceiling rail:

    1. Should antennas be mounted rotated 90 degs one from another?

    2. What should be separation between antennas? Installation Guide states only 12-24" and T shaped alignement for three antennas.

     

    In case of ANT-2x2-STAGE direct mount antennas, when serving clients in low ceiling areas with AP (2x2, N-type) mounted on a ceiling, what should be proper alignment of adjustable "sticks"? Should it be 90 deg between antennas on same radio (which would give us -45 deg from ceiling for both antennas)?

     

    What is original maker's p/n of this antenna? No available radiation pattern for this antenna on Aruba site.

     

    Thanks,