Wireless Access

Reply
Occasional Contributor II
Posts: 21
Registered: ‎07-05-2007

"Dirty" flag surge after upgrade

Recently we upgraded from 6.3 to 6.4.2.10 on 7200-series controllers.

We are now enjoying a huge surge of "Dirty" flags (from "none" for years to "manymany" within a week).

Has anyone else noticed an increase in 'Dirty" flags in going to 6.4?  There have been no changes to the infrastructure between these versions.

MVP
Posts: 4,228
Registered: ‎07-20-2011

Re: "Dirty" flag surge after upgrade

what type of APs are you running in your infrastructure ?
12x , 13x , RAPs (155 , 3) , etc..

Take a look at the show log system all | include < mac address or ap-name of one the AP with the Dirty flag >

And also look at the show log errorlog all
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 1,418
Registered: ‎10-25-2011

Re: "Dirty" flag surge after upgrade

http://community.arubanetworks.com/t5/Controller-Based-WLANs/Why-do-AP-s-go-into-Dirty-flag-How-can-we-troubleshoot-this/ta-p/177974
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: