Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all
This thread has been viewed 1 times
  • 1.  radio issue

    Posted Sep 19, 2012 05:08 AM

    Hi,

     

    Please see attached dashboard and advise it is within acceptable or require some tuning.

     

    Thanks

    Capture.JPG



  • 2.  RE: radio issue

    EMPLOYEE
    Posted Sep 19, 2012 09:27 AM

    mgeorge,

     

    The thresholds that trigger those numbers on the dashboard are not configurable.  Different noise floors and different levels of interference are acceptable or vary in different environments.  Without seeing the numbers behind that chart and if you are having any issues at those locations, we do not know if there is cause for concern, or not.

     



  • 3.  RE: radio issue

    Posted Sep 19, 2012 01:41 PM

    Thanks for the reply, could you clarify this,

    1) noise floor is disturbance caused by non 802.11 devices ?

    2) interference is the disturbance by nearby AP?



  • 4.  RE: radio issue
    Best Answer

    EMPLOYEE
    Posted Sep 19, 2012 03:19 PM

    @mgeorge wrote:

    Thanks for the reply, could you clarify this,

    1) noise floor is disturbance caused by non 802.11 devices ?

    2) interference is the disturbance by nearby AP?


    Please see the presentation here:  http://community.arubanetworks.com/t5/Community-Knowledge-Base/802-11-RF-Troubleshooting-Best-Practices/ta-p/20410

     

    1.  Yes and No.

    2.  Not necessarily