Wireless Access

Reply
MVP
Posts: 3,015
Registered: ‎10-25-2011

rap3 instant to remote ap conversion

Okay im trying to convert it and its not working...

I got RAPs 2 already working properly

But when i try to convert a rap 3 which is on instant mode to remote AP and i put the controller public ip address its not working...

 

I got  4500 and tftp port open....

 

it send me a message that the vpn setup failed....

 

There is anything else it need to be done for this convertion?

 

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Guru Elite
Posts: 21,499
Registered: ‎03-29-2007

Re: rap3 instant to remote ap conversion

The controller needs to be on the 6.1.4.1 code designed for RAP3s for this to work.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

MVP
Posts: 3,015
Registered: ‎10-25-2011

Re: rap3 instant to remote ap conversion

Collin where do i get this firmware?

the lastest one i can see is

Release 6.1.3.5

 

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
MVP
Posts: 3,015
Registered: ‎10-25-2011

Re: rap3 instant to remote ap conversion

i can see the 6.1.4.0 on fips folder but on the normal folder on Aruba OS is not there... on gneeral i see that one i said before on technology folder got something of airgroup and on technology folder in aruba os is empty...

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: rap3 instant to remote ap conversion

6.1.4.x is in Controlled Release for pilot testing.  Please contact Aruba TAC to obtain a copy.  6.1.4.x will be rolled into 6.2 GA which should be available before the end of the year.

MVP
Posts: 3,015
Registered: ‎10-25-2011

Re: rap3 instant to remote ap conversion

So to use rap 3 as a remote AP  i need to use a pilot testing version?

If so its no good for production network i guess... at least not yet...

 

is rap 3 a really new product or something?

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: rap3 instant to remote ap conversion

RAP-3WN began shipping mid / late July '12.

 

We just started posting code to the TAC site as General Availability, Early Deployment, and Technology releases and will use this moving forward.  Definitions of each category can be found here:

 

http://www.arubanetworks.com/support-services/end-of-life-products/end-of-life-policy/

 

MVP
Posts: 3,015
Registered: ‎10-25-2011

Re: rap3 instant to remote ap conversion

Thank you very muhc for the information

Just one last question

there will be no more revisions for .6.1.3.x?

Now you guys starting with 6.1.4.x already?

 

Cheers

 

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: rap3 instant to remote ap conversion

6.1.4.x is branch based on 6.1.3.x.

6.1.3.x is an active branch.......6.1.3.5 was just released a couple of weeks ago.

I'm not sure if there will be a 6.1.3.6 or if we will go straight to 6.2 at this point which should be out soon.

Search Airheads
Showing results for 
Search instead for 
Did you mean: