Wireless Access

last person joined: 11 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

refreshing AP-204 with AP-304

This thread has been viewed 1 times

  • 1.  refreshing AP-204 with AP-304

    Posted Jul 16, 2018 10:17 AM

    we are running some AP-204 with sector antennas. Now we have to add AP-304. How can you run 2 antennas on AP-304? Can you disable the 3rd antenna port or do we need to install rp-sma "0-6 GHz RP-SMA plug terminator"  



  • 2.  RE: refreshing AP-204 with AP-304
    Best Answer

    EMPLOYEE
    Posted Jul 24, 2018 02:00 PM
    @jAyR wrote:

    we are running some AP-204 with sector antennas. Now we have to add AP-304. How can you run 2 antennas on AP-304? Can you disable the 3rd antenna port or do we need to install rp-sma "0-6 GHz RP-SMA plug terminator"  

    Yes, to use a 2x2 antenna on a 3x3 AP, you would need to install an rp-sma terminator on the unused antenna connector on the AP-303.