12-08-2011 11:06 AM
I just had a problem on one site were I faced some electrical issues and the controller were off for a while. When the controller came back online all the info on the internal database were lost, so I want to know what is the right way to save the info on the internal DB and how do I make a back up of it??
12-08-2011 11:25 AM - edited 12-08-2011 11:25 AM
I believe these are the commands you are looking for:
local-userdb export local-userdb-export
copy flash: local-userdb-export tftp: 192.168.0.25 local-userdb.bin
12-08-2011 02:01 PM - edited 12-08-2011 02:02 PM
The export command that Zach showed you saves the exported DB to a file in the controller's flash. You'll see it when you issue the "dir" command.
12-08-2011 03:43 PM
You need to upgrade to at least 188.8.131.52 (release notes attached).
There are 3 bugs (45049, 37387, 38793) that were discovered where when a controller is shut down unexpectedly, it causes corruption to the local database. Upgrading to 184.108.40.206 will ensure that you will not have to copy off and save the local database.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
05-08-2012 06:36 AM
Am I correct in assuming that the local-userdb is saved in the flashbackup as well?
If my post is helpful please give kudos, or mark as solved if it answers your post.
ACCP, ACMP, ACMX #294