02-08-2017 03:06 AM
We are in the middle of a TAC case and as part of that we will be running a debug image on some CAPs. To test this I have been consoling to an AP to set the serverip to our tftp server, this works fine.
I now need to apply this to 3 APs out there in the field, it would be much easier if I could change these settings remotely using Telnet, is that possible? The commands I need to run are:
apboot>setenv serverip <TFTP ip address>
apboot>setenv masterip <Controller IP>
apboot>setenv bootcmd tftpboot
apboot>setenv bootfile <filename>.ari
Solved! Go to Solution.
02-08-2017 04:32 AM
Unfortunately, that cannot be done interactively over telnet.
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.