Wireless Access

Reply
Occasional Contributor II
Posts: 15
Registered: ‎05-10-2014

setup AirGroup for AirPlay with AirServer

Dear All,

We have Aruba wireless system with Aruba 3600 Controller and several 105 AP.
We use HP Procurve switches on our network and roughly following are some vlans:

 

vlan 16 - Apple TV

vlan 18 - Windows 7 desktop machines with AirServer
vlan 19 - Aruba APs

vlan 38 - Wireless iPads

 

The Aruba setup was done year ago by a external consultant. Currently iPads can only see the Apple TVs on vlan 16.

If I connect one of the Desktop machine (AirServer) on vlan 38, the iPads can see this machine but how do I configure AirGroup so that iPads can see all the Windows 7 on vlan 18 ? Can this be done without Clearpass ?

 

 

Any help would be much appreciated, thank you.

 

 

 

 

Guru Elite
Posts: 20,956
Registered: ‎03-29-2007

Re: setup AirGroup for AirPlay with AirServer

You need to be running ArubaOS 6.3.1.x or higher and Airgroup will enable this automatically.  All VLANs would need to be trunked to the Aruba 3600 controller for users to be able to see "Air" devices across subnets.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: