Hi Colin, apoligies, the regulatory domain profile shown above was the one I changed to after the issue occured. The default profile which was used when the issue occured has channel 100 configured.
Regardless of the above, do we know why the AP is is scanning every second and recording that output? Since I changed the reg domain profile to use the non-DFS channels I can see this has settled down and now remains on AP36 (see below).
What is the cause of this behaviour?
Interface :wifi0
ARM History
-----------
Time of Change Old Channel New Channel Old Power New Power Reason
-------------- ----------- ----------- --------- --------- ------
2015-11-25 14:37:57 36 36 15 18 P+
2015-11-25 13:04:27 100+ 140 18 18 I
2015-11-25 13:04:26 100+ 140 18 18 I
2015-11-25 13:04:25 100+ 140 18 18 I
2015-11-25 13:04:24 100+ 140 18 18 I
2015-11-25 13:04:23 100+ 140 18 18 I
2015-11-25 13:04:22 100+ 140 18 18 I
2015-11-25 13:04:21 100+ 140 18 18 I
2015-11-25 13:04:20 100+ 140 18 18 I
2015-11-25 13:04:19 100+ 140 18 18 I
2015-11-25 13:04:18 100+ 140 18 18 I
2015-11-25 13:04:17 100+ 140 18 18 I
2015-11-25 13:04:16 100+ 140 18 18 I
2015-11-25 13:04:15 100+ 140 18 18 I
2015-11-25 13:04:14 100+ 140 18 18 I
2015-11-25 13:04:13 100+ 140 18 18 I
2015-11-25 13:04:12 100+ 140 18 18 I
2015-11-25 13:04:10 100+ 140 18 18 I
2015-11-25 13:04:09 100+ 140 18 18 I
2015-11-25 13:04:08 100+ 140 18 18 I
2015-11-25 13:04:07 100+ 140 18 18 I
2015-11-25 13:04:06 100+ 140 18 18 I
2015-11-25 13:04:05 100+ 140 18 18 I
2015-11-25 13:04:04 100+ 140 18 18 I
2015-11-25 13:04:03 100+ 140 18 18 I
2015-11-25 13:04:02 100+ 140 18 18 I
2015-11-25 13:04:01 100+ 140 18 18 I
2015-11-25 13:04:00 100+ 140 18 18 I
2015-11-25 13:03:59 100+ 140 18 18 I
2015-11-25 13:03:58 100+ 140 18 18 I
2015-11-25 13:03:57 100+ 140 18 18 I
2015-11-25 13:03:56 100+ 140 18 18 I