Wireless Access

Reply
Contributor I
Posts: 76
Registered: ‎05-14-2009

show rogue/interferring SSIDs in CLI

I am using A.OS version 3.4 here. Does anyone know the commands to show list of Rogue/Interferring SSIDs in CLI?

 

Thanks!:smileylol:

Guru Elite
Posts: 20,819
Registered: ‎03-29-2007

Re: show rogue/interferring SSIDs in CLI

show wms ap list

 

To find rogues:

 

show wms ap list | include rogue



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 76
Registered: ‎05-14-2009

Re: show rogue/interferring SSIDs in CLI

thanks colin!

 

looks like this command only shows result from excuting from the master controller.

Guru Elite
Posts: 20,819
Registered: ‎03-29-2007

Re: show rogue/interferring SSIDs in CLI

Skywalker,

 

Yes, that is where all that info is correlated and stored.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 66
Registered: ‎08-20-2007

Re: show rogue/interferring SSIDs in CLI

Other than:

show wms rogue-ap <bssid>

 

Is there a way on the command line to see the APs that are able to see the rogue and their SNR?

 

I used to look at the list under the Dashboard -> Security -> [Locate] button, but since upgrading to 6.1.3.1 that box is always empty (tried different OSes and browsers).

 

The locate used to work after seeing those as well.

 

Aruba Employee
Posts: 664
Registered: ‎04-15-2009

Re: show rogue/interferring SSIDs in CLI

"show ap monitor ap-list ap-name <name of AP> | include rogue"

Contributor II
Posts: 66
Registered: ‎08-20-2007

Re: show rogue/interferring SSIDs in CLI

Cool, yeah, I mean that works but how do I know which APs can see it?  If I have to specify each AP by name it will take sometime.

 

That list gave me AP - SNR to rogue

 

My guess is with CLI I'd have to:

  1. show wms rogue;
  2. find the nearest AP;
  3. show the ap-list for that AP (include rogue)
  4. Find APs near that AP from the list
  5. Repeat
Aruba Employee
Posts: 664
Registered: ‎04-15-2009

Re: show rogue/interferring SSIDs in CLI

show wms ap-list | include rogue

 

That should give you all the AP MAC addrs that can hear the rogues (you can replace "rogue" with the ESSID name to get only the APs that hear a specific ESSID).

 

Is that more what you were looking for?  What it doesnt give you is the AP name, only the MAC addr.  You can use the "show ap database long" command to see the wired MAC for each AP.

Search Airheads
Showing results for 
Search instead for 
Did you mean: