Wireless Access

Reply
mom
Contributor II

show users connected to rap

Hello!

 

Is it normal that a users whitch is connected to a RAP is not shown up by the show user command or at the monitoring Page under "Monitoring -> Controller -> Clients"?
I see RAP users only with airwave.

 

Is there a way to check rap users at controller side, with a command?

 

Thank you!

 

Best regards
Matthias
Guru Elite

Re: show users connected to rap

Is it a tunneled, split or bridged SSID?







********************************************

Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
mom
Contributor II

Re: show users connected to rap

Hi!

Thank you for your rapid answear!
It's a split tunnel SSID.

Best regards
Matthias
Guru Elite

Re: show users connected to rap

If you type "show user-table" on the commandline you should see all clients.  You should also be able to see them in the GUI under controller> clients. Which version of ArubaOS are you running?







********************************************

Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
mom
Contributor II

Re: show users connected to rap

I see them neither with "show user-table" nor under GUI.
The controllers are running under 6.5.4.3.

 

Best regards
Matthias
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: