Sorry:
#2, To script things, you should
- create an ARM profile that has ARM set to disable. If the radio profile has an arm profile attached with arm disabled, the AP would switch to the channel of the radio profile and NOT use ARM.
- create a radio profile with a channel and assign that ARM profile to it.
- Assign that radio profile to an AP, using an AP-Specific profile:
config t
rf arm-profile "disabled"
assignment "disable"
!
rf dot11a-radio-profile "channel36"
channel 36
arm-profile "disabled"
!
ap-name "Office-225"
dot11a-radio-profile "channel36"
After that you can set other APs to channel 36, by doing this:
config t
ap-name "Library-225
dot11a-radio-profile "channel36"