Wireless Access

Reply
Super Contributor II
Posts: 429
Registered: ‎01-19-2011

syslog of Guest email addresses

I have setup a guest network with guest entering an email address on the controllers internal captive portal page before being allowed onto the internet. If I include the command "logging XXX.XXX.XXX.XXX" I can see the line of output with the guests email address however I would like to limit the traffic sent to the syslog server as much as possible - how can I do this?

 

 

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: syslog of Guest email addresses

At the bottom of your show run output, there are logging options.  Please post them.  You can prune them or add classifications like 

 

(config) #logging 10.10.10.10 severity ?
alerts Immediate action needed
critical Critical Condition
debugging Debug Messages
emergencies System is unusable
errors Error Conditions in the system
informational Informational Messages
notifications Normal but significant condition
warnings Warning condition

 

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Super Contributor II
Posts: 429
Registered: ‎01-19-2011

Re: syslog of Guest email addresses

What is there is the following -

 

logging level informational user subcat all
logging facility local7
logging 10.102.135.253

 

Matt

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: syslog of Guest email addresses

If you remove "logging level informational user subcat all", then your messages should reduce

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Super Contributor II
Posts: 429
Registered: ‎01-19-2011

Re: syslog of Guest email addresses

Thats not quite what I meant, with the "logging xxx.xxx.xxx.xxx" command I get everything (or so it seems) I'm looking for a command that will display the email address of the guest client logging on and as little as possible else.

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: syslog of Guest email addresses

Ah!  Does the information need to be in syslog format?  Do you own Airwave?

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Super Contributor II
Posts: 429
Registered: ‎01-19-2011

Re: syslog of Guest email addresses

As it happens they do have an Airwave, but I was told by our internal Airwave person that they could not gather this info via Airwave, was he wrong?

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: syslog of Guest email addresses

The email address of the guest becomes the user name in the output of the "show user" command. That table is on Airwave and can be reported against. Those reports can be run automatically and emailed out or retained on the server.
Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: