Wireless Access

last person joined: 15 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

syslogs send a different interface vlan on controller ?

This thread has been viewed 0 times

  • 1.  syslogs send a different interface vlan on controller ?

    Posted Jan 24, 2017 03:49 AM

    hi all

     

    in deployment there is a controller 650 and running version 6.4.x. 

    we are sending "auth. success logs" to palo alto firewall for User-Ip Mapping. 

     

    we want  to send different syslogs  from different interface vlan . Is it possible.? 

     

    thanks for your replies !!

     

     

     



  • 2.  RE: syslogs send a different interface vlan on controller ?

    Posted Jan 24, 2017 04:34 AM
    Are you wanting to send logs to the same location via 2 different routes?

    If so, this isn't possible.


  • 3.  RE: syslogs send a different interface vlan on controller ?

    Posted Jan 24, 2017 05:05 AM

    Yes james. i needed it. 

    Well, is it possible sending different location via different routes ? 

     

    thanks



  • 4.  RE: syslogs send a different interface vlan on controller ?

    Posted Jan 24, 2017 05:14 AM

    It certainly is possible to send to different locations via different routes. You just need to configure a static route to the different location.

     

    CLI

    (Aruba7010) (config) #ip route <dest> <desmask> <nexthop> <cost>

     

    CLI Example:

    (Aruba7010) (config) #ip route 10.10.10.99 255.255.255.255 11.11.11.200 1

     

    GUI Example

    2017-01-24 10_12_13-Network IP Routing Configuration.jpg